Our standard and Anatomical Healing Abutments (Caps) were designed to guide and sculpt the gingival tissue by replicating the anatomy of the original root form. This provides a natural and aesthetic emergence profile for the final restoration. 
‍
Available in various diameters and collar heights.

Ideal abutments for single tooth and multi-unit cemented restorations. These specially designed abutments provide an improved aesthetic gingival contour.
‍
Choose from straight or angulated abutments that vary in diameter from 3.8 to 5.6 mm and in length from 6.0 to 11.5 mm with collar heights ranging from 1 to 4.0 mm.
 
The appropriate abutment screw is supplied with each abutment.

Ditron Dental USA provides two Overdenture Abutment solutions; The Ball Abutment and the Liberator® Abutment. 
‍
The Liberator® Abutment’s low vertical profile and innovative swivel capability increase the resiliency and tolerance for the high occlusal forces during chewing. 
‍
Both abutments feature a variety of retention options.

The Impression Copings are designed to transfer the dental implant’s X, Y and Z position and hex orientation as well as to capture the soft tissue profile. 
‍
Tight accuracies are maintained with all the Impression Coping parts to ensure that the implant position will be accurately reproduced with the Analogs on the laboratory model, and the final restoration will be aligned exactly as intended.
‍
Available for both the closed and open tray transfer impression technique.

Our Temporary Abutments are non-engaged and designed for immediate loading procedures on bridges, avoiding a second-stage procedure and reducing chair time for both clinician and patient.
‍
Three different Plastic Sleeves are available to fabricate the temporary bridge restoration (Hard, Standard & Soft).
‍
Available for all Ditron Dental USA’s implant lines for cement-retained temporary multiple units.

Available in both Straight and Angulated Screw-Retained Restoration Abutments that vary in diameter from 4.7 to 4.8 mm with collar heights ranging from 0.5 to 5.0 mm. 
‍
The Straight Abutments are designed for multi-unit restorations and removable or fixed overdenture bar solutions. 
‍
The Angulated Abutments provide an innovative and low-profile solution for dental implants placed at challenging angles. 
‍
The appropriate abutment screw is supplied with each abutment.